Skip to main content

Temperature Probe: 1. Introduction

Input Module for External Temperature Probes


A variety of Zennio devices incorporate an input interface where it is possible to connect one or more Zennio temperature probes:

  • 6,8k NTC Probes:
    • ZACNTCE – Epoxy, black colour.
    • ZACNTCF – Rigid epoxy, black colour.
    • ZACNTCS – Steel.
    • ZACNTCW – Epoxy, white, mini size.
  • Probes for surface installation:
    • ZAC-SQAT – SQ-AmbienT, in white, grey and anthracite colours.
    • ZACFAT – Flat Ambient, in white, grey and anthracite colours.
  • 10k NTC Probes:
    • 9900015 – Epoxy, black colour, mini size.

The connection of custom NTC temperature probes is also allowed, by configuring their specific parameters in ETS.

Please refer to the specific user manual and datasheet of each Zennio device as they may have this functionality using the internal temperature probe or to obtain specific instructions on connecting external probes to the device’s input interface.

On the other hand, keep in mind that even being the probe model the same, the functionality and the configuration in ETS may be slightly different depending on the device and the version of the application program.